has already done much of the calculation necessary to draw at desired scale. On such a scale, if using 1/4″= 1′-0″, 1′ is shown on the scale as 1/4″ in lenght 2′ are shown as 1/2″, and so on. With hand drafting, one would typically use an architect’s or engineer’s scale to assist in correctly making a drawing “to scale”. The XP scale is the relationship between the desired plotted scale and the sheet of paper on which it will be plotted. Many clients, including governement agencies, will require a minimum text size for legibility. If the same drawing will be printed at 1/4″=1′-0″, and that the text also needs to be 1/8″ high, any text related to 1/4″ scale output would be set to 6″ in the model. Because all work is done in AutoCAD models should be at 1:1, text and labels must be adjusted to appropiate sizes based on the scale at which they will be printedįor example: if a detail drawing will be printed at 3″=1′-0″, and the desired height of the text when printed is 1/8″, the text in the model must be set to 0.5″.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |